Dimmer/Switch: 0.5 W: Test conditions: Load is off and locator light is enabled.
Companion Dimmer/Switch: 0.2 W: Test conditions: Load is off.
Regulatory Approvals: cULus, NOM, FCC, IC, IFT (-PRO-N and -8ANS), cULus, NOM, FCC, IC (-RD and -RS)
Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity,
non-condensing. Indoor use only.
Communications Dimmers and switches communicate with the system through Clear Connect-Type X Radio Frequency (RF) and must be located within 75 ft (22.8 m) of a centrally located RadioRA 3 wireless processor/gateway. Each Sunnata dimmer should have at least two other non-battery powered Clear Connect-Type X devices within 25 ft (7.6 m). Clear Connect-Type X devices include, for example, the RadioRA 3 wireless processor/gateway, Sunnata dimmers, Sunnata switches, and Sunnata keypads. Companion dimmers /switches are not Clear Connect Type X devices, and are not required to be within a specific range of a RadioRA 3 wireless processor/gateway. System devices operate on a frequency of 2.4 GHz.
ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
RTISS Equipped Circuitry compensates in real time for incoming line-voltage variations (-PRO-N only).
Power Failure Power failure memory: Should power be interrupted, the control will return to its previous state when power is restored.
Mounting: Requires a U.S. wallbox. 3½ in (89 mm) deep recommended, 2¼ in (57 mm) deep minimum. For best wireless performance, use a metal wallbox when installing the product in a concrete or stone wall.
Wiring: Use only companion dimmers (-RD) and companion switches (-RS) with dimmers/switches. Up to four companion dimmers (-RD) may be connected to the dimmer and four companion switches (-RS) may be connected to the switch. Total wire length may be up to 150 ft (45 m).
Use in place of a standard light switch to provide on/off control of lighting, as well as system control from the app, keypads, Pico remotes, sensors and other connected devices.
RadioRA 3 Sunnata local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 3 Sunnata dimmers and companion dimmers incorporate advanced features such as fade-on/fade-off, delayed long fade-to-off, and rapid full-on.
RadioRA 3 Sunnata local controls include a locator light to assist in locating the controls at night. RadioRA 3 Sunnata local controls install in single pole or multi-location applications. Sunnata companion dimmers and companion switches must be used for multi-location control. RadioRA 3 Sunnata local controls include a Front Accessible Service Switch (FASS) for safe light bulb replacement.