Frame My TV SRS-2 | Smart Room Sensor is required to integrate with the Motion & Light Sensor built into Samsung The Frame TVs to preserve the functionality of the TV's native features
Frame My TV IR-3 | Universal Remote Repeater is required in cases where you are using a universal remote other than the remote supplied with the TV
Frame My TV IR-3 | Universal Remote Repeater
NOTE:
Universal Remote Repeater is required in cases where you are using a universal remote other than the remote supplied with the TV
This Device is NOT necessary if you are using the standard remote control that comes with a Samsung Frame TV. It's ONLY used in cases where you are using a universal remote other than the remote supplied with the TV.
When is this Device Necessary?
When adding a Deco TV Frame onto a Samsung Frame TV, the remote control sensor is obstructed by the frame. In most normal use cases, this would not matter because the standard remote that comes with Samsung Frame TV's communicates via Radio Frequency (RF) with the TV to send and receive signals.
Connections Diagram
The IR-3 device is very easy to install. Both the transmitter and the receiver are attached directly to the wall with the provided adhesive backing as shown. You just need to position the Receiver down low enough that it's not obstructed by the Deco TV Frame as shown below. The other remaining cords can be tucked behind the TV and run to a power outlet.
Features:
NOTE:
Universal Remote Repeater is required in cases where you are using a universal remote other than the remote supplied with the TV.
This Device is NOT necessary if you are using the standard remote control that comes with a Samsung Frame TV. It's ONLY used in cases where you are using a universal remote other than the remote supplied with the TV.
When is this Device Necessary?
When adding a Deco TV Frame onto a Samsung Frame TV, the remote control sensor is obstructed by the frame. In most normal use cases, this would not matter because the standard remote that comes with Samsung Frame TV's communicates via Radio Frequency (RF) with the TV to send and receive signals.
Connections Diagram
The IR-3 device is very easy to install. Both the transmitter and the receiver are attached directly to the wall with the provided adhesive backing as shown. You just need to position the Receiver down low enough that it's not obstructed by the Deco TV Frame as shown below. The other remaining cords can be tucked behind the TV and run to a power outlet.
Overview:
When using a universal remote with a Samsung Frame TV in combination with an obstruction of the infrared eye, you will need an infrared repeater to pass the signal into the TV.
NOTE: This Device is NOT necessary if you are using the standard remote control that comes with a Samsung Frame TV. It's ONLY used in cases where you are using a universal remote other than the remote supplied with the TV.