Vanco EVOIPTX1 | Evolution EVO-IP Transmitter, HDMI Over IP
Technical
HDMI Compliance: HDMI
HDCP Compliance: Yes
Video Resolution: 4K@60Hz, 4:4:4; 4K@60Hz, 4:2:0 HDR10; 4K@30Hz, 4:4:4 HDR10; 4K@30Hz, 4:2:2 HDR10 and Dolby Vision; 4K@24Hz, 4:4:4 HDR10 and Dolby Vision
Latency: 2 frames (33ms) maximum
HDMI over UTP transmission [24-bit]: 1Ultra HD (4K@60) up to 330ft/100m over Cat6
Audio Support: Surround sound (up to 7.1ch) PCM, DTS, Dolby
Input TMDS signal: 1.2 Volts [peak-to-peak]
Input DDC signal: 5 Volts [peak-to-peak, TTL]
ESD Protection: Human body model in. ±15kV [air-gap discharge] & ±8kV [contact discharge]
IR Pass-Thru: Full-duplex bi-directional
RS-232 Support: Yes
IR Remote Control: Dual Band: 20-60kHz
HDMI Connector: Type A [19-pin female]
Mechanical
Transmitter and Receiver Housing: Metal enclosure
Fixedness: Wall-mounting case with screws
Power supply: 5V 2A DC
Power consumption: 6 Watts TX; 5Watts RX
Operation temperature: 32~113F
Storage temperature: -4~140F
Relative humidity: 20-90% RH (no condensation)
Features:
Supports 4K@60Hz, 4:4:4 chroma
System can support over 1000 transmitters and receivers
HDR10 and Dolby Vision compatible
Dolby/DTS/PCM audio formats supported
HDCP 2.2/1.4
POE or can be powered using provided power supply
Manual dip switch configurable for a truly IP-Less installation
Easy GUI automatically detects new devices in the system
Customizable labels and names of sources and displays
Setup through the GUI can be done without a computer even being on site
Analog and Digital audio breakouts on TX and RX
HDMI Loop-out for cascading or monitoring
Upscale to 4K@30Hz or downscale to 720p
EDID preset/learning
Video Wall mode supports configurations up to 25 displays
OSD mode to display text, pictures, or logos on the screen
Great for digital signage!
Connects to the cloud to schedule events or to troubleshoot a situation remotely
Able to be controlled with Alexa enabled products
Overview:
The Evolution by Vanco EVO-IP HDMI over IP is a complete audio, video, and control product over ethernet system. As a whole, the system has the ability to send up to 1064 sources to 1064 displays along with IR and RS-232 pass-through, analog and digital audio breakouts on the send and receive ends, video up to 4K@60Hz and HDR10/Dolby Vision compatibility, with POE up to 330ft/100m when connected to a POE enabled switch off of a single Cat6 cable. The transmitter is also equipped with an HDMI loop-out that allows the system to incorporate other products such as Evolution tiling and Multi-view products easily with minimal additional programming. As a dedicated system, EVO-IP can also create and recall video walls using up to 25 displays, and can overlay text, pictures, and even albums which is perfect for digital signage! When connected to a network, the EVO-IP Cloud allows for additional features such as scheduling events or maintenance, remote monitoring of a system including diagnostics and troubleshooting, as well as voice control capabilities with Alexa enabled products! With an IP-less installation option as well as any new sources/displays being discovered automatically within the system, the EVO-IP HDMI over IP system is the fast, easy, and perfect solution for both residential and commercial installations.
)
