IEEE 802.3ad (Link Aggregation Control Protocol LACP)
IEEE 802.3af (Power over Ethernet 802.3at Type 1)
IEEE 802.3at (Power over Ethernet 802.3at Type 2)
IEEE 802.3az (Energy Efficient Ethernet EEE) (can be deactivated)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control, for full duplex mode)
General
Ports
- Eight 10/100/1000 Mbps RJ45 PoE-enabled ports
- Two Gigabit SFP slots
- One console port
MAC address table: 8192 entries
Buffer memory: 512 kBytes
Backplane speed: 20 Gbps
Switch architecture: store and forward
Peak packet rate: 14.88 Mpps
MTBF: 259,692 hours
Cooling
- One Fan
- Noise level: 23.5 dB(A) (max.)
Smart configuration options
- 802.1x authentication
- ACL Access Control List
- Broadcast Storm configuration with broadcast rate, multicast rate, and flooded unicast rate
- Cable diagnostic
- DHCP Relay with Option82
- IGMP Snooping via command line
- Port link speed: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation
- Flow control on/off per port
- LAN settings (IP address, DHCP, Gateway, etc.)
- MAC address management, learning & aging, MAC filter
- Ping utility
- Port Mirroring, one to one or many to one
- Port Aggregation/LACP: 8 groups
- Quality of Service (QoS)
- Link Layer Discovery Protocol (LLDP) - Station and Media Access Control Connectivity Discovery
- Radius server via command line
- Rate limiting (ingress rate and egress rate)
- RMON groups (statistic, history, alarm and event)
- SNMPv1/v2c/v3 (Simple Network Management Protocol)
- Spanning tree (STP, RSTP, MSTP)
- TACAS+ via command line
- Tracert utility
- VLAN
PoE management features
- PoE on / off per port
- PoE mode support per port: AF & AT / AF only
- Maximum power per port
- PoE priority per port: Low, medium, high
- PoE alarm notification via SNMP traps
- PoE delay start configuration per port
- PoE restart time configuration per port
- PoE status monitoring
Pinout RJ45 output ports (Data + Power)
- IEEE Alternative A
- Pin 1: Rx+ (data receive) + Vdc_return (+) (feeding power [+])
- Pin 2: Rx- (data receive) + Vdc_return (+) (feeding power [+])
- Pin 3: Tx+ (data transmit) + Vdc (feeding power [-])
- Pin 6: Tx- (data transmit) + Vdc (feeding power [-])
Certifications: FCC Class A, CE, UKCA, NDAA
LEDs
PoE
Power
Link/activity
Power
Input: 100.0 in. 240.0 VAC, 50 in. 60 Hz
Power consumption: 163.2 watts (max.)
Environmental
Metal housing
Dimensions: 280 (W) x 180 (L) x 44 (H) [mm] / 11.02 (W) x 7.09 (L) x 1.73 (H) [in.]
Weight: 1.6 kg (3.5 lbs.)
Operating temperature: 0 in. 45°C (32 in. 113°F)
Operating humidity: 10 in. 90% RH, non-condensing
Storage temperature: -10 in. 70°C (14 in. 158°F)
Package Contents
8-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports
19" rackmount brackets
Power cable
Instructions
Features:
Provides power and data connection for up to eight PoE network devices
Save time and money by delivering data and power via existing network cables
Self-Healing Network - the Powered Device Monitor feature (PDM) restarts any connected PoE device that fails to respond or send out network traffic
Domotz compatible for cloud management (may require firmware upgrade)
For use on desktop or mounted in standard 19" rack
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras, etc.)
Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
IEEE 802.3az (Energy Efficient Ethernet EEE) can be deactivated
Supports IEEE 802.3at/af detection and short circuit, overload and highvoltage protection
All RJ45 ports with Auto-MDIX (auto uplink) support
Configuration via Web browser, Telnet or SSH
Remote Reboot/restart
Supports SNMP management
PoE Management – PoE port settings, priority and power-on delay
IGMP Snooping for multicast filtering
SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9
Supports VLAN (tag-based and port-based)
Overview:
8-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports
IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, 140 W, Self-Healing Network, Endspan, Desktop, 19" Rackmount
The Intellinet Network Solutions 8-Port Gigabit Ethernet PoE+ Web-Managed Switch is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports (all of which support 802.3at/af PoE/PoE+), this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.