Specs:
Ubiquiti USW-PRO-MAX-48-POE | 48-port Layer 3 Etherlighting POE Switch 2.5 GbE
Mechanical
- Dimensions: 442.4 x 400 x 44 mm (17.4 x 15.7 x 1.7")
- Weight:
Without mounting brackets: 6.2 kg (13.7 lb),
With mounting brackets: 6.3 kg (13.9 lb)
- Enclosure material: SGCC steel
Hardware
- PoE Ports
- Max. PoE Wattage per Port by PSE
PoE: 15.4W
PoE+: 32W
PoE++: 64W
Max. Power Consumption
100W (Excluding PoE Output)
820W (Including PoE Output)
- Power Method
(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP RPS DC input
- Power Input Method: AC input
- Power Supply: AC/DC, internal, 870W
- Supported Voltage Range: 100—240V AC
- Management: Ethernet, AR
- Heat Dissipation (Excluding PoE Output): 341.2 BTU/hr
- Enclosure Material: SGCC steel
- Mount Material: SGCC steel
- Supported Rack Depth: 400~1200 mm (15.7-47.2")
- LCM Display: 1.3" touchscreen
- ESD/EMP Protection: Air: ± 16kV, contact: ± 12kV
- Ambient Operating Temperature: -5 to 40° C (23 to 104° F)
- Ambient Operating Humidity: 10 to 90% noncondensing
- Etherlighting™: Ethernet, SFP+
- NDAA Compliant
- Certifications: CE, FCC, IC, Anatel
Performance
- Switching Capacity: 224 Gbps
- Total Non-Blocking Throughput: 112 Gbps
- Forwarding Rate: 167 Mpps
- Supported VLANs: 1,000
- MAC Address Table Size: 32,000
- L3 Table Size
ARP Entries: 12,000
IPv4 Routes: 12,000
- Packet Buffer Size: 2 MB
- Access Lists
Switching Features
- Layer 2 features:
LACP Port Aggregation
STP & RSTP
QoS (DSCP)
Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron)
Advanced IGMP Configuration (Querier, Fast Leave, Router Port)
IGMP Snooping
802.1X Control
MAC-Based ACLs & Device Isolation
DHCP Snooping & Guarding
Egress Rate Limit
Flow Control
Storm Control
Multicast & Broadcast Rate Limiting
MAC Address Blocking
IP-Based ACLs & Network Isolation
MAC-Based Port Restriction
Port Isolation
Port Mirroring
Jumbo Frames
LLDP-MED
Voice VLAN
Loop Protection
- Layer 3 Features:
DHCP Server (Local Networks)
DHCP Relay
Inter-VLAN Routing (Local Networks)
Static Routing (Local Networks)
Application Requirements
- UniFi Network: Version 8.0.24 and later