Specs:
Ubiquiti UAHUB | Access Hub
- Dimensions: 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")
- Weight: 363 g (12.8 oz)
- Enclosure material: Polycarbonate
- Mounting material: Polycarbonate
Hardware
- Networking interface: (5) 10/100/1000 Base-T
- Power method: PoE++, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
- Max. power consumption: Without PoE output: 30W, With PoE output: 50W
- PoE input: 50V DC, 1A
- PoE output: PoE passthrough, (4) PoE, 50V DC, total 20W
- LEDs: White/blue (Learn more)
- Button: (1) Factory-reset
- Digital input: Request to exit/request to enter/remote release/door position sensor
- Dry output relay: Lock: 30V DC, 1A, Aux: 30V DC, 1A
- Powered output relay: Lock: 12V DC, 1A, Aux: 12V DC, 0.33A, 12V DC, 0.33A
- PoE cabling requirements: Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
- Operating environment: Indoor use only
- Ambient operating temperature: 0 to 40° C (32 to 104° F)
- Ambient operating humidity: 5 to 95% noncondensing
- UL 294 level:
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
- UL 294 statement: Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- CAN/ULC-60839-11-1 Grade: Grade assignment: 1
- Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level: UA-Hub-Door002, V01
)
