Available with optional rack ears to allow mounting in 19” equipment racks
Maximum ambient temperature: 40 degrees C.
Internal Power Supply
Voltage input range: 90 to 264 VAC, 127 to 370 VDC
Safety standards: UL60950-1,TUV EN60950-1, CCC GB4943, EAC TP TC 004 approved
Efficiency: up to 95% efficient
Surge withstand: 300 Vac for 5 seconds
External Power Requirement: 600W maximum
Speaker Connections
Speaker impedance: 2 Ohms to 8 Ohms
Multiple speakers can be connected in parallel as long as the effective impedance is greater than 2 Ohms (e.g. one zone could have 3 left speakers and 3 right speakers if each speaker is 8 Ohms)
Speaker wires:
Accepts 12 to 22 gauge wires
Stripping length: approximately 0.25 to 0.3”
Attach by tightening screws
4 pluggable 8-position terminal blocks with 0.2” spacing
Flammability rating according to UL 94 V0
V(ESD) Electrostatic Discharge:
Human-body model (HBM), per AEC Q100–002: ±3000V
Charged-device model (CDM), per AEC Q100–011: ±500V
Protective Functions
Output current limiting, output short-circuit protection, over-temperature, under-voltage and over-voltage
Amplifier Power Output:
40W peak per channel (80 W peak per zone). RMS power: 20W per channel (40W per zone)
Aggregate output power of zones operated simultaneously: ~400W peak
Network connections
Ethernet via an RJ-45 connector, or
Wi-Fi using WPA2. Note: Juke should be within 10 to 15 feet of an access point
Features:
Multi-Room Audio Amplification:
The Juke-6 powers 6 zones (12 speakers channels) of passive speakers
The Juke-8 powers 8 zones (16 speaker channels) of speakers
Can use multiple jukes together on the network to reach more than 8 zones
Outputs 40 watts per channel (20 watts RMS) into 8 ohms and is stable down to 2 ohms
Wireless Inputs:
Stream from your phone / tablet to Juke with the following compatible wireless inputs: Airplay 2, Spotify Connect, Bluetooth, DLNA
App Control:
Downloadable in the Apple App Store and Google Play Store, the Juke Audio app allows for full wireless control of the system with the following features:
Independent volume slider for every zone
Group input functionality for streaming to multiple zones together from any audio input type
Set presets to any user preference
Streamlined device setup
Wired Audio Inputs:
Can support up to 2 wired audio sources per device via this USB to RCA adapter.
Common sources include Vinyl Player, Microphone, Tuner. etc.
Network Requirements:
In order to ensure the most reliable performance, we recommend hardwiring the Juke amplifier via ethernet into the router / modem. If this can not be done, you can connect Juke to the network wirelessly via Wi-Fi as long as the Juke is within 15ft of the nearest router or extender/access point. If this can not be done with the current networking equipment at location, we recommend using a TP-Link N300 or similar extender and connecting Juke to its Ethernet port.
Overview:
Power speakers across every room with the Juke multi-room amplifier and control all aspects of the system wirelessly via the easy to use app.
Juke Audio's multi-zone streaming amplifier is a revolutionary all-in-one product used for powering and wirelessly controlling pre-wired speakers across an entire home or building. At the size of a textbook, the Juke can drive architectural speakers across an entire house/building, support multiple audio sources / users simultaneously, and be controlled wirelessly via the an intuitive application available for Android and Apple.
Juke is a break-through in simplicity, reliability, and cost-effectiveness.