Specs:

Vanco / Pulse PAEXWIR | Wireless 2.1ch Audio Extender


• Wirelessly extends stereo analog and subwoofer audio signals up to 164ft (50m).
  
• Audio transmission Uncompressed, adaptive FHSS
  
• Audio formats PCM/stereo
  
• Sampling rate 24-bit, 48 KHz
  
• Frequency response:
  
  Line level 20Hz to 20kHz
  Subwoofer 20Hz to 170Hz
  
  
• Subwoofer output 6dB
  
• Audio distortion <1%
  
• Signal to noise ratio >80dB
  
• Latency <20ms
  
• Radio frequency
  
  5.8G - RF channel 5725~5850MHz
  5.2G - RF channel 5135~5260MHz
  
  
• Transmission range
  
  Line of site (best results) 164ft (50m)
  Walls, ceilings, and floors (WiFi rules apply) 50ft (15m)
  
  
• Voltage level 2.4V
  
• Power supply 5V, 1A
  
• Dimensions 4.10in x 2.90in x 1.10in (105mm x 74mm x 29mm)
  
• Net weight 0.40lbs (181.43g)
  
• Package contents:
  
  (1) Wireless audio extender set – TX and RX
  (2) USB-A male to right angle power cables
  (2) USB-A power adapters
  (2) Adhesive mounting pads
  (1) Quick start guide
  
  

Features:

• Wireless transmission of a 2.1 audio system (2Ch with 1 subwoofer)
  
• Lossless audio up to 164ft (50m) with line of sight or 50ft (15m) through walls, ceilings, and floors (WiFi rules apply)
  
• 24-bit, 48KHz uncompressed high quality stereo audio
  
• LPF (low pass filter) mono subwoofer input/output
  
• Selectable wireless frequency from either 5.2GHz or 5.8GHz to reduce interference for a consistent and stable connection
  

Overview:

The PulseAudio PAEXWIR wireless audio extender allows stereo analog signals and subwoofer audio to be extended wirelessly up to 164ft (50m) with line of sight or 50ft (15m) through walls, ceilings, and floors (WiFi rules apply). This device utilizes 5.2GHz or 5.8GHz signals to help reduce interference resulting in a consistent and stable connection without comprising audio quality. The PAEXWIR is a great solution where cabling cannot be run to remote speakers or subwoofers.

Review: