HDMI Compliance: HDMI Deep Color 30/36/48 bit color depth, Full 3D
HDCP Compliance: Yes
Video Bandwidth: 594 MHz
Video Support: 480i/480p/720p/1080i/1080p/4Kx2K @60
Audio Support: Surround Sound (up to 7.1 ch) or stereo digital audio
Input TMDS Signal: 1.2 Volts (peak to peak)
Input DDC Signal: 5 Volts (peak to peak, TTL)
ESD protection: (1) Human body model +/- 6kV (air-gap discharge) & (contact discharge) (2) Core chipset - +/-8KV
PCB stack-up: 4 layer board (impedance control - differential 100, single 50
IR pass-thru: Full-duplex bi-directional
Input: (TX) 1xHDMI; ( RX) 1xRJ45 + 2x3.5mm
Output: (TX) 1xRJ45 + 2x3.5mm; (RX) 1xHDMI
HDMI source control: Controllable via IR pass-through from RX to TX and from TX to RX with IR extenders or via CEC integrated
HDMI connector: Type A 19 pin female
RJ-45 connector.: WE/SS 8P8C
LED indicators: Video lock yellow, Power, green
3.5mm connector: (TX and RX) IR Receiver/ IR blaster MECHANICAL SPECS
Housing: Metal enclosure
Power supply: (1)12V 2A
Power consumption: 3.5 Watts TX, 2.5 Watts RX
Operation temperature: 0 ~ 45 degrees Celsius
Storage temperature: -20~85 degrees Celsius
Relative humidity: 20-90% RH (no condensation)
Package Contents
EV4K2006 (TX & RX)
(2) IR Blasters (TX)
(2) IR Receivers (RX)
(1) DC 12V in line power supply
Product Manual
Features:
Allows HDMI audio/video signals to be transmitted using a single Cat5e or Cat6 Cable
Transmission Range: Extends 4K@60Hz, 4:4:4 Chroma up to 164ft/50m and 4K@30Hz, 4:4:4 Chroma and HDR up to 130ft/40m over a single Cat5e/6 cable
Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6, allowing the transmitter and receiver to be powered off of a single power supply
Wideband Bi-directional IR system allowing for control of source or display (IR accessories included)
Wideband IR signal from 20KHz to 60KHz
Features Auto EDID and EQ Management for plug and play installation
HDR10 Compatible
Works with HDMI and HDCP compliant devices
HDCP 2.2 compliant
Slim and compact design
Pure uncompressed 7.1ch digital audio
Supports DTS-HD and Dolby TrueHD high bit rate audio
Dimensions: 2.7” (68.58mm) W x .7” (17.78mm) H x 3.25” (82.55mm)
Overview:
The Evolution by Vanco EV4K2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and Bi-directional PoE extends 4K ultra high de nition video with HDR and audio signals, IR, and power. Extends 4K@60Hz, 4:4:4 Chroma Subsampling and HDR up to 164ft/50m, and 4K@30Hz, 4:4:4 Chroma Subsampling, and HDR up to 130ft/40m. Bi- directional Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically adjusts for compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and exible installations. This product fully supports DTS-HD and Dolby TrueHD audio formats and is HDCP compliant. In addition, bi-directional IR pass-through allows for source or display control. For extending HDMI over a single Cat5e/6 with IR at a long distance, with Power over Ethernet, the EV4K2006 is a great plug and play solution! The EV4K2006 includes two units: transmitting unit (EV4K2006-TX) and receiving unit (EV4K2006-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EV4K2006 offers the most convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet and is the perfect solution for any application.