TechLogix TL-TP40-HDC2 | 18G HDMI Extender | Special Order
I/O Connections
HDMI: HDMI Type A Receptacle
Twisted Pair: 8P8C port (Shielded RJ45)
IR Input: 3.5mm TRS Jack
IR Output: 3.5mm TS Jack
RS232: 3pin phoenix socket
24V DC Power: 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking)
Supported Video and Audio
Maximum Video Compatibility: 70 m: Deep Color 36/30/24 Bit at 1080p 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0
Video Compliance: HDMI, HDCP 2.2, and CEC (Consumer Electronics Control)
Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal: 5.0 volts p-p (TTL)
Input Video Signal: 0.5 to 1.0 volts p-p
IR Carrier Frequency Range: 33-55kHz at 5 volts
Extender Signal Characteristics
Maximum Distance: 70 m: Deep Color 36/30/24 Bit at 1080p, 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 60 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Cable Requirements: Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Bandwidth: 10.2 Gbps
Signal Compression: 1.8:1 Maximum; Compression starts when video signal >9 Gbps
Chassis and Environmental
Enclosure: Painted aluminum
Dimensions: 115mm x 84mm x 16mm
Shipping Weight: 0.71Kg (1.55 lbs) (Tx+Rx)
Operating Temperature (Environment): -10° to +40° C
Operating Temperature (Chassis): 45° C
Operating Humidity (Environment): 10% ~ 90%
Storage Temperature (Environment): -15° to +70° C
Storage Humidity (Environment): 0%~55%
Power, ESD, Regulatory
Maximum Power Consumption: 4.4W(TX), 6.7W(RX)
Power Supply: 24V DC
ESD Protection: 15KV
Regulatory: CE, FCC
Other
Standard Warranty: 3 Year
Diagnostic Indicators: Power LEDs
RS232/ Firmware Switch: 3-position Slider
What's Included
Installation Guide
Power supply
US power cord
Mounting in.Lin. brackets (4 each)
Mounting screws (4 each)
IR Transmitter
IR Receiver
Features:
Transmit HDMI, RS232 & IR over a single twisted pair cable
18G 4K@60 4:4:4 compatible
130 ft. (40m) max distance for 4K
220 ft. (70m) max distance for 1080p
Embedded bi-directional IR and RS232 control
System powered from either the transmitter or receiver
HDMI 2.0 and HDCP 2.2 compliant
CEC & HDR compatible
Light compression (2:1 ratio) on signals over 10G
Overview:
The TL-TP40-HDC2 is an ultra-thin extender set consisting of a transmitter (TL-TP40-HDC2-T) and a receiver (TL-TP40-HDC2-R). The set transmits an HDMI signal to the receiver up to 70m distance via a Cat5e/Cat6A cable. The embedded VLC compression chipset allows 4K/60 at 4:4:4 video to reach distances up to 40m over a single Category 6 cable with no visual artifacts. Featuring bi-directional IR and RS232, you can control your display or source using included accessories. With bi-directional PoE power, you only need to connect the power supply on one end.