Just Add Power VBS-HDMI-508POE | 3G 4K Receiver POE
Compliancy: HDCP 2.2 & RoHS/FCC/CE
Operating Temp: 0-60 °C / 32-140 °F
Supported Resolutions: Up to 4096x2160 / (interlaced & progressive)
Dimensions: 5.0in. x 1.2in. x 4.9in.
Weight: 0.6 lb
Ports:
Gigabit Ethernet
HDMI Out
3.5mm RS232 w/ null modem
Bandwidth: 180-500 Mbps
Power Supply (not included): ~4.7 in. 23V / 5.5mm/2.1mm, Positive tip
PoE: 10 watts maximum
Features:
Decodes the IP data back into a 4K or 1080p HDMI signal to be displayed on any screen.
Can be set to scale 4K signals with HDCP 2.2 down to a 1080p signals for displaying on non HDCP 2.2-compliant 1080p TVs. Perfect for homes where there is that annoying 1080p set in a bathroom, basement or outdoor area.
Can upscale 1080p signals to 4K.
Can also be set to passthrough mode meaning that no scaling takes place.
Passthrough mode is ideal for when you would prefer to rely on a TVs built-in upscaler.
RS232 control
Outputs any audio signal from stereo up to object-based formats (Dolby Atmos and DTS:X).
If a source device is set to Dolby Digital 5.1 and connected to a 3G+AVPro transmitter, the 3G+PoE receiver can decode this as 2.0 channel if in a stereo audio zone, and can alternatively decode it as 5.1 in a multichannel zone.
Fully PoE- no power supplies are needed.
Can also be used to build 4K or 1080p video walls, from 2×2 to 16×16 in size.
Overview:
4K over IP Fiber not required, the Just Add Power 3G Receiver distributes UltraHD & 4K video over a single Cat5e cable.
Built-in Scaler Watch any source at any resolution
Enhanced Image Play Image Push, Image Pull, & new Image Pop Rotate and flip video with expanded Video Wall
Build a future-proof 4K infrastructure Just Add Power UltraHD over IP integrates seamlessly with 1080p infrastructure – keep the switch, cabling, and driver! Add 4K to current 1080p systems, or build a new 4K system.