Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C),
0% to 90% humidity, non-condensing. Indoor use only. Communications
Dimmers and switches communicate with the system through Radio
Frequency (RF) and must be located within 30 ft (9 m) of a repeater.
Remote dimmers / switches are not required to be within a specific
range of a repeater. System devices operate on frequencies between
431.0 MHz and 437.0 MHz. ESD Protection
Tested to withstand electrostatic discharge without damage or memory
loss, in accordance with IEC 61000-4-2. Surge Protection
Tested to withstand surge voltages without damage or loss of operation,
in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. Power Failure
Power failure memory: should power be interrupted, the control will
return to its previous state when power is restored. Mounting
Requires a U.S. wallbox. 3½ in (89 mm) deep recommended, 2¼ in
(57 mm) deep minimum. Wiring
Uses conventional 3-way and 4-way wiring. Warranty
1 Year Limited Warranty. http://www.lutron.com/resiinfo
Features:
On a single-tap, lights or motors turn ON or OFF.
Neutral and two-wire switches available.
Overview:
RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched.