Bank 5, High Current Outlets - 60 db, 100 KHz - 2 MHz
Power / Current - 1500 VA / 12A
Output Voltage Range - 120 VAC ± 6 VAC
Input Voltage Range - 100-136 VAC
Buck Stage - reduces voltage in the 125-136 V range
Boost Stage 2 - boosts voltage in the 100-109 V range
Boost Stage 1 - boosts voltage in the 109-119 V range
Voltage and Polarity - 3 - 24V DC, Bidirectional
Jacks - 3.5mm (1/8" mono mini-plug)
Current Requirement - 4.6 mA @3V, 58 mA @24V
Positive = Tip, Negative = Ring
Pass through no delay
Wires Protected - 8-Wires
Connectors - RJ-45
Clamping Level - 52V
Power Delivery - 500 mA @ 5VDC
Packaging Length - 19.25"
Jacks USB-A
Wires Protected - 2-Wire, Pins 4 & 5
Suppression Modes - Metallic & Longitudinal
Fuseless/Auto-resetting
Connectors - RJ-11
Clamping Level - 260V
Capacitance - 30pf (approx.)
Shielded
Insertion Loss - < 0.5 dB
HD 1080 i/p Ready
Frequency Range - 0 MHz - 2.2 GHz
Connections - Female "F", Gold Plated
Clamping Level - 75V
Bidirectional
Dimensions (WxHxD): 17" x 12.75" D x 3.5", (4.1 in. Including feet)
Weight 36 lbs.
Features:
Frequency Range - 0 MHz - 2.2 GHz
UL1449 Suppression Rating - 330V
Thermal Fusing
Pass through no delay
Fuseless/Auto-resetting
HD 1080 i/p Ready
Bidirectional
Dimensions (WxHxD): 17" x 12.75" D x 3.5", (4.1 in. Including feet)
Weight 36 lbs.
Overview:
Voltage Regulation Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment.
Improves Picture and Sound Quality Level 4+ Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level Panamax?s patent pending AVM? circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Reduces Cross-Contamination Between Components The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank