Specs:

RTI ZM-24 Zigbee Transceiver Module


• Enables bi-directional Zigbee® communication.
  
• Wireless Zigbee® communication range between ZM-24 modules up to 100 feet.
  
• Connects to a central processor from up to 1000 feet away using standard Cat5 cable.
  
• Create a self-healing mesh network by adding modules configured in "repeater" mode using the ZB-PRO Programming Tool.
  
• Utilizes IEEE802.15.4 wireless Zigbee® communication at 2.4Ghz.
  
• Durable plastic enclosure and adjustable antenna.
  
• Receives power from an RTI control processor or from the included power supply.
  
• Durable plastic enclosure and adjustable antenna.
  
• Easy mounting with a detachable wall bracket.
  
  
• RTI COM Port Two-way Zigbee® Communication Port, RJ45 Connection
  
• Drives up to 1000 ft (300 m) of wire.
  
• Wireless Networking IEEE802.15.4 Zigbee© network compliant
  
• RF Carrier Frequency 2.4Ghz - 2.5Ghz
  
• Device Capability Total number of devices is limited only by memory
  
• Communications OTA (Over-the-air) Programmable
  
• Enclosure High-impact molded ABS plastic, black
  
• Mounting Detachable bracket
  
  
• Dimensions - Antenna Extended 3.5" x 7.5 " x 1.1"
  
• Weight 4.4 oz.
  
  NOTE: A 2.4 GHz Zigbee® enabled remote control and processor must be used with this model of transceiver. It is not compatible with the 433MHz remote controls.
  

Features:

Overview:

Utilizing the latest in wireless technology, the ZM-24 Transceiver Module is capable of more than just receiving signals - it can transmit signals as well. This creates a bi-directional communication link between Zigbee® enabled RTI control processors and handheld remote controls. Feedback, such as song meta-data or volume level from supported devices can now be viewed on the remote control.

The ZM-24 is easy to install, since only one module needs to be hard-wired to the control processor. Additional ?repeater? modules can be added by simply powering them from any electrical outlet within communication range of other modules. The ZM-24 units will then create a self-healing ?mesh? network which adapts to changes or problems with the communication path.

NOTE: A 2.4 GHz Zigbee® enabled remote control and processor must be used with this model of transceiver. It is not compatible with the 433MHz remote controls.

Review: