LUTRON RR-PROC3-CW | RADIO RA3 PROCESSOR CEILING AND WALL
RADIO RA3 PROCESSOR RR-PROC3-CW (includes ceiling and wall mounts)
PoE Power
L-POEI-BL (included in RR-PROC3-KIT, available for purchase separately) - fully compliant with IEEE802.3af (max. 15.4 W)
Processor must be powered by PoE supply that is IEEE 802.3af, IEEE 802.3at or IEEE 802.3bt compliant.
Processor is classified as Class 1 typical 1.5 W(max. 4.0 W) IEEE 802.3af device.
Environment
Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
0% to 90% humidity, non-condensing
Indoor use only
Communications
seeTouch keypads, Maestro dimmers, Pico wireless controls, Sivoia QS wireless shades, etc. (Clear Connect â?? Type A):
â?? Each device must be within 30 ft (9 m) of a repeater or wireless processor.
â?? Repeaters can be spanned up to 60 ft (18 m) apart from other repeaters to create the network.
â?? Utilizes 434 MHz RF (North America)
Sunnata dimmers, switches, keypads, etc. (Clear Connect â?? Type X):
â?? All devices associated with the wireless processor must be within a 75 ft (23 m) radius of the processor.
â?? There must be a minimum of two devices within 25 ft (7.6 m) of the wireless processor.
â?? Each Clear Connect â?? Type X device should have two or more non-battery powered Type X devices within 25 ft (7.6 m) of another compatible Clear Connect â?? Type X device. Using more than two devices is ideal for creating an ultra high-performance mesh network.
â?? Utilizes 2.4 GHz RF
Internet connection required for initial setup and to receive periodic firmware updates.
For more information, please refer to the Wireless Setup Guide which can be found in the RA3 Support Center: www.lutron.com/RA3support Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
0% to 90% humidity, non-condensing
Indoor use only
Protection
Tested to withstand electrostatic discharge without damage or memory loss in accordance with IEC 61000-4-2
Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991
Power Failure Memory
Should power be interrupted, the RA3 processor will return to its previous state when power is restored.
Timeclock will be retained via internal battery backup.
Connections
RadioRA 3 processor requires an Ethernet connection for data and power via Power over Ethernet (PoE).
RR-PROC3-KIT includes a 6 ft (1.8 m) down-angle Ethernet cable for connection to the processor mounted in the shelf-mount adapter and 3 ft (1 m) Ethernet cable for connection to WiFi router.
Mounting
Reliability of Clear Connect wireless communication requires that the wireless processor be centrally-located and within a maximum distance of
the specific wireless devices in the system. Wireless processors must be mounted 5 ft (1.5 m) away from wireless interference sources like microwaves, Wireless Access Points (WAPs), etc.
PoE wiring must be kept internal to the building. Do not run PoE wiring outdoors or install the processor in metallic enclosures.
Maximum supported Ethernet cable length is 328 ft (100 m)
For myLutron users, please see Application Note #745 (P/N 048745) for additional information on ClearConnect â?? Type X Best Practices on www.lutron.com
Features:
Programmed via the Lutron Designer PC tool and Lutron App.
Scene control via the Lutron App, Pico, Sunnata, and see Touch scene keypads.
Timeclock scheduling of daily events.
Powered by an IEEE 802.3af, IEEE 802.3at or IEEE 802.3bt compliant Power over Ethernet (PoE) switch or injector.
Connects to the Wi-Fi router via an Ethernet connection.
Local device operation will continue to function if internet connection is lost.
System access from anywhere in the world using the Lutron App.
Control outside the app via widgets (iOS and Android).
Supports Geofencing from the Lutron App.
Control from Apple Watch.
Supports integration with other smart home brands including Amazon® Alexa®, Apple HomeKit®, Google® Assistant, Sonos®, Ring®, and more.
Up to four (4) wireless repeaters can be added to extend the range for Clear Connect – Type A devices (Maestro, etc.) for larger systems. The wireless repeater does not extend the range of Clear Connect – Type X devices (Sunnata, etc.).
Integration with professional A/V and security systems via Lutron’s LEAP API.
Overview:
The brain of the system that makes everything work based on your design, from the keypads to the timeclocks, to motion-sensor activated lights and more.
RadioRA 3 processors allow for setup, control, and monitoring of RadioRA devices and Lutron wireless shades from a smartphone or tablet using the Lutron App.
RadioRA 3 processors also enable compatible Lutron control systems to communicate with up to 99 Clear Connect – Type X devices per processor (100 devices total) and 99 Clear Connect – Type A devices per processor (100 devices total).