Specs:

Lutron RRD-PRO-WH | RA2 PRO LED+ Dimmer, White


• Power: 120 V~ 50/60 Hz
  
• Dimmer/Switch/Fan Speed Control: 0.6 W
  
• Remote Dimmer/Switch: 0 W
  
• Regulatory Approvals: UL, cUL, NOM, FCC, IC, COFETEL, ANATEL
  
• Environment: Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
  
• Communications: Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. Remote dimmers/switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
  
• ESD Protection: Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
  
• Surge Protection: Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
  
• RTISS Equipped: Circuitry compensates in real time for incoming line-voltage variations (neutral connection required). -PRO only.
  
• Power Fialure: Power failure memory: should power be interrupted, the control will return to its previous state when power is restored.
  
• Mounting: Requires a U.S. wallbox. 31/2 in (89 mm) deep recommended, 21/4 in (57 mm) deep minimum.
  
• Wiring: Uses conventional 3-way and 4-way wiring with mechanical toggle switches or accessory dimmers for remote operation. RRD-PRO requires accessory dimmers for remote operation. Mechanical switches are not supported.
  

Features:

Overview:

RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. Local fan speed controls are useful in locations where control of a single ceiling paddle fan is needed.

RadioRA 2 Maestro dimmers incorporate advanced features such as fade-on/fade-off, delayed long fade-to-off, and rapid full-on.

RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASS) for safe lamp replacement. RadioRA 2 Maestro local controls install in single pole or multi-location applications. Remote dimmers/switches are available for multi-location control.

Review: