Specs:

LUTRON PD6WCLBL Caseta In-Wall Dimmer (Black)

Specifications

• cULus Listed
  
• NOM certified
  
• FCC Approved. Complies with the limits for a Class B
  digital device, pursuant to Part 15 of the FCC Rules
  
• Industry Canada certified
  
• COFETEL certified
  
• Power - Operating voltage: 120 V~ 50/60 Hz
  Design Features
  
• Tested to withstand electrostatic discharge without damage or memory loss, in accordance with
  IEC 61000-4-2.
  
• Tested to withstand surge voltages without damage or
  loss of operation, in accordance with
  IEEE C62.41-1991 Recommended Practice on Surge
  Voltages in Low-Voltage AC Power Circuits.
  
• Dimmers always operate locally and do not require
  system control.
  
• Power failure memory: should power be interrupted,
  the control will return to its previously set level prior to
  the interruption when power is restored.
  
• Uses LutronR ClaroR wallplates or designer-style
  wallplates from other manufacturers. Wallplates are
  sold separately.
  
• LutronR ClaroR wallplates snap on with no visible
  means of attachment.
  
• Requires a 1-gang U.S. wallbox. 3.5 inches (89 mm) deep
  recommended, 2.25 inches (57 mm) deep minimum.
  
• Green LEDs indicate load status
  System Communications and Capacity
  
• The CasétaT Wireless in-wall dimmer communicates with the PicoR remote controls and Radio Powr SavrT sensors through radio frequency (RF).
  
• The CasétaT Wireless in-wall dimmer must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls, of PicoR remote controls and Radio Powr SavrT sensors.
  
• Up to ten transmitting devices may be associated to each in-wall dimmer.
  Environment
  
• Ambient operating temperature: 32 °F to 104 °F
  (0 °C to 40 °C), 0%-90% humidity, non-condensing.
  
• Indoor use only.
  

Features:

• The CasétaT Wireless in-wall dimmer provides
  dimming of multiple load types and allows remote
  control and occupancy/vacancy sensing when paired
  with wireless transmitting devices.
  
• LutronR patented Clear ConnectR RF Technology
  works through walls and floors.
  
• Includes Front Accessible Service Switch (FASST) for
  safe lamp replacement.
  
• Two-wire dimmer ideal for retrofit applications.
  No neutral required.
  
• Power failure memory: If power is interrupted, the
  control will return to its previously set level prior to
  interruption.
  
• Works with dimmable LEDs and CFLs as well as
  incandescent and halogen light bulbs.
  

Overview:

The Caséta Wireless in-wall dimmer controls lighting loads automatically through wireless sensors and wireless remote controls, providing a system that delivers energy savings, convenience, and ease of installation. The Caséta Wireless in-wall dimmer uses Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for total load control.

Review: