Specs:

LEA CS164 | Connect Series 4 Channel Power Amplifier 160 watts SPECIAL ORDER

INPUTS:

• Analog: 4 Balanced Inputs with user selectable 26dB, 34dB, and mic level input sensitivity
  
• 4 unbalanced RCA inputs with user-selectable 26dB and 34dB input sensitivity
  ***Note – Unbalanced and RCA inputs share the same analog input channel
  
• THD+N: 0.1% (20Hz to 20kHz)
  
• FREQUENCY RESPONSE: 20Hz to 20kHz, +/- 0.5 dB @ 4 Ohms, 8 Ohms, 70V, 100V, -2.5dB @ 20kHz at 2 Ohms
  
• SIGNAL TO NOISE LEVEL: 105dB (20Hz to 20kHz referenced to 8 Ohms)
  
• CROSSTALK: 70dB (20Hz to 20kHz)
  
• AMPLIFIER OUTPUT CLASSIFICATION: Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
  
• DSP ARCHITECTURE: Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
  
• INPUT MATRIX: Routable matrix; any input to any output with primary and secondary input priority
  
• CROSSOVERS: Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
  
• PARAMETRIC EQ: 8 Band Parametric EQ per channel
  
• OUTPUT DELAY: 100ms per channel
  
• OUTPUT PROTECTION: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
  
• USER ADJUSTABLE LIMITING: Peak Voltage and RMS Voltage
  
• LOAD MONITORING: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
  
• USER INTERFACE: Web Browser User Interface, 3rd Party API control, Cloud Control, or SharkWare
  
  EXTERNAL I/O
  
• External I/O In: Toggles Remote On/Off
  
• External I/O Out: Indicates Amplifier Health
  
  OPERATION
  
• AC MAINS: 100VAC – 240VAC +/- 15% 50Hz or 60Hz
  
• POWER SUPPLY: Universal Switch Mode Power Supply
  
  DIMENSIONS (L x W x H)
  
• Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U)
  
• Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
  
• WEIGHT: 12.25lbs / 5.56kg | Shipping: 16.55lbs / 7.51kg
  
  COOLING
  
• Front to Rear Variable Fan Speed Cooling
  
• Fan Noise at idle is 50dB @ 1m
  
• Fan Noise at 50% is 57dB @1m
  
• Fan Noise at full speed is 63dB @ 1m
  

Features:

• SMART AMP
  
• 4 CHANNELS
  
• 160 WATTS PER CHANNEL
  
• 3 WAYS TO CONNECT
  
• WEB BROWSER-BASED UI
  
• CLOUD CONTROL
  
• DIRECT LOW-Z & HI-Z-70V or 100V
  
• SMART POWER BRIDGE
  
• UNIVERSAL SWITCH-MODE POWER SUPPLY
  
• ANALOG BALANCED INPUTS
  
• 96KHZ ANALOG DEVICES DSP
  
• EXTERNAL I/O PORT
  
• HIGHLY EFFICIENT CLASS-D OUTPUT STAGE
  

Overview:

The CONNECTSERIES 164 is a 4-channel amplifier with 160 watts per channel. As part of the Network CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 164 features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.

Then there’s the Cloud…Network CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.

Review: