Lip Sync Delay: Individual Lip Sync Delay for each Speaker and Preamp Zone
Delay Time: 0 in. 400ms
Adjustable: 10ms increments
Tone Control
Individual Tone Control for Each Speaker and Preamp Zone
Five-band equalizer
Loudness on/off
High/Low pass
Adjustable Crossover Points
Trigger Outputs
3.5mm Mono
Zone Trigger / System Trigger Outputs
Pinout: Tip = signal, Sleeve = ground
Output: +12Vdc, 100mA current limit
Network
1 RJ45 Jack 100/1000 Ethernet DHCP Enabled by Default
Power
AC 100-120 / 220-240 V~ 50/60Hz, 1000W
Temperature
Operating Temperature: +5° C in. +45° C (+41°F in. +113°F)
Operating Humidity: 0 in. 90% non-condensing
Storage Temperature: 0° C in. +60° C (32°F in. +140°F)
Dimensions
17D X 17W X 4H in. / 431.8D X 431.8W X 101.6H mm (with feet)
17D X 17W X 3.5 in. / 431.8D X 431.8W X 88.9H mm (without feet)
Weight: 21.35 lbs / 9.68 Kg
Features:
4 Stereo or 8 Mono Amplifed Zones and 2 Stereo or 4 Mono Pre-amp Zones
80WPC at 8Ω, 100WPC at 4Ω
DSP with 5-Band EQ for Each Zone
Lip Sync Correction
Dante Audio Networking
Overview:
The EL-IPD-AMP-EXT is used in conjunction with an amplifier or preamp in the ELAN family of IP enabled amps to add up to 8 zones of audio.
Configure speaker outputs as left, right, or mono with single or multiple speakers connected to each. Four line level audio outputs can be configured as left, right, mono, or subwoofer out.
Each output or combination of outputs can be configured as separate zones with EQ and lip sync delay applied to any zone individually.
ELAN IP enabled audio distribution simplifies whole house audio distribution and enhances the intelligent home by delivering high quality audio over the existing network. Easily scaling from a single chassis solution to a decentralized multi-chassis / multi-source implementation, ELAN IP audio distribution meets the needs for projects of up to 64 individual zones.