Inputs: 8 Stereo Local Analog Inputs, 1 Stereo Bus Coaxial Digital Input, 1 Stereo Bus Analog Input
Input Sensitivity: Variable 0 to 1 Vrms
Analog Input Sensitivity: 1 Vrms for full output; level at maximum
OUTPUTS
Amplifier Channels: 16
1 Stereo Bus Analog Loop Output
Power Output (8 Ω): 100 W per channel
Power Output (4 Ω): 200 W per channel
Power Output (Bridged Mono): 400 W
Minimum Speaker Load: 4 Ω
PERFORMANCE
Damping Factor: >300
Signal to Noise: >105 dB, (A-wtd, ref full output)
Crosstalk: >80 dB @ 1kHz
Gain: 30 dB
Analog Input Sensitivity: 1 Vrms for full output, level at maximum
DAC Specifications: 32 to 96 kHz sample rate, 16-/24-bit depth
CONTROL
Remote Power Trigger: +12 VDC or Dry Contact Closure, 2 x 1/8" TS mono in/out
AC POWER REQUIREMENTS
Standby: 0.9 W
Idle (main power on, all channels off): 42 W
All channels active: 90 W
All channels 1/8th rated power: 338 W
Full power (20 A residential service limited): 2400 W
Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads
BTU/HR OUTPUT
Standby: 3.1 BTU/hr
Idle (main power on, all channels off): 144 BTU/hr
All channels active: 307 BTU/hr
All channels 1/8th rated power: 415 BTU/hr
Full power (20 A residential service limited): 2124 BTU/hr
WEIGHT & DIMENSIONS
Dimensions: 19" W (w/rack ears) 17” W (w/o rack ears) x 15.5” D x 3.5" H (2 U)
Weight: 20.5 lbs. (9.3 kg)
IN THE BOX
Architect Model P2660, Speaker Connectors, Remote Connector, Power Cord, Manual, Warranty
Features:
16 Channels of AudioControl Power and Performance
100 watts per channel into 8 Ohms (All channels driven)
200 watts per channel into 4 Ohms (All channels driven)
Configurable into 8 Bridged Channels
Bridged Channel Power 400 watts into 8 Ohms
Energy-Efficient Cool Operation
Low Standby Current Draw, 1 watt or Less
Compact Design Fits into 2 Rack Spaces
LightDrive Anti-Clipping Protection Circuitry
2 x Bus Inputs A (Digital) & B (Analog)
Global 12 VDC Trigger Input and Output
Remote/Local Zone Input Trigger
Signal-Sensing On All Channels
Level Controls for All Input Pairs
Stereo-to-Mono Switch for Easy Channel Bridging
Rack Mount Brackets Included
Five-Year AudioControl Warranty
Overview:
16-Channel High-Power Multi-Zone Amplifier
The Architect ‘P’ Series superbly complements AudioControl’s popular high-power Architect multi-zone amplifier series, delivering 100 watts RMS per channel into 8 ohms and 200 watts per channel into 4 ohms, all channels driven.
16 channels of high-power amplification are output from the compact 2 U chassis, with the Architect P2660 delivering 100 watts per channel into 8 ohms and 200 watts per channel into 4 ohms, all channels driven. Channel bridging increases power to a remarkable 400 watts into 8 ohms. Benefitting from 35 years of proprietary AudioControl cool-running amplifier design, the Architect P2660 is equipped with features like input bussing, output pass-through, global 12 VDC trigger in/out with local 12 VDC trigger inputs for all zones, and input signal sensing on/off. Bus A includes a coaxial S/PDIF input for a digital source. Amplifier channels and connected loudspeakers are protected by AudioControl’s fast-acting LightDrive anti-clipping circuitry.
Available in a robust black powder coat finish, the Architect Model P2660 is designed, engineered, and manufactured at AudioControl facilities located in Seattle, USA. The Architect ‘P’ series is covered by AudioControl’s legendary 5-year warranty and is available exclusively to the residential, custom install, and Pro Audio markets through AudioControl authorized dealers.
)
