TechLogix TL-SMP-HDV | Share-Me Hub & Receiver with HDMI & VGA Input | SPECIAL ORDER
Transmitter I/O Connections
HDMI In: HDMI Type A Receptacle
VGA In with Audio: Female HD15 connector with 3.5 mm TRS
TP Out (Bottom of device): 8P8C port (Shielded RJ45)
IR (IR learning only): Embedded IR receiver
Firmware: Micro USB Type B
Receiver I/O Connections
HDMI Out: HDMI Type A Receptacle
TP In: 8P8C port (Shielded RJ45)
IR Out: 3.5mm TS Jack
DC 12V: 5.5 mm Outside Diameter, 2.6mm Inside Diameter Barrel (Locking)
Supported Video and Audio
Maximum Video Compatibility: 70 m: Deep Color 36/30/24 Bit at 1080p 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0
Video Compliance: HDMI, HDCP 1.4, and CEC (Consumer Electronics Control)
Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal: 5.0 volts p-p (TTL)
Input Video Signal: 0.5 to 1.0 volts p-p
IR Carrier Frequency Range: 33-55kHz at 5 volts
Extender Signal Characteristics
Maximum Distance: 70 m: Deep Color 36/30/24 Bit at 1080p, 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0
Cable Requirements: Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Bandwidth: 10.2 Gbps
Maximum Distance: 70 m (220 ft)
Chassis and Environmental
Enclosure: Top: Gray ABS, Bottom: Painted Steel
Transmitter Dimensions (HxWxD): 42 mm x 150 mm x 120 mm (1.65 in x 5.91 in x 4.72 in)
Receiver Dimensions(HxWxD): 23 mm x 130 mm x 102 mm (0.91 in x 5.12 in x 4.02 in)
Shipping Weight: 1.72 kg (3.80lbs)
Operating Temperature (Environment): -10° to +40° C
Operating Humidity (Environment): 10% ~ 90%
Storage Temperature (Environment): -15° to +70° C
Storage Humidity (Environment): 0%~55%
Power, ESD, Regulatory
Maximum Power Consumption: 4.4W(TX), 6.7W(RX)
Power Supply: 12V DC
ESD Protection: 15KV
Regulatory: CE, FCC
Other
Standard Warranty: 1 Year
Transmitter Diagnostic Indicators: Power LED, HDMI active LED, VGA active LED
Receiver Diagnostic Indicators: Power LED, Twisted Pair LEDs
Included Items: Power supply with adapters(US, EU, UK, AU), mounting in.Lin. brackets (2ea), mounting screws (2 ea), IR Transmitter, Rubber feet (8 ea)
Features:
Designed for table or podium-top use
HDMI and VGA+audio inputs
HDMI output
Twisted pair connection between transmitter and receiver
Buttons for source selection and display control
Built-in cable strain relief and security
Built-in IR window for learning commands
Selectable CEC and IR display control outputs
Powered from the receiver
Locking power supply
220 ft. (70m) max distance between transmitter and receiver
Overview:
Historically, collaboration technology meant expense and complexity or do-it-yourself frustration. In either case, rarely was the actual use and preference of the ultimate user considered. Enter the TechLogix SMP System.
This intuitive package combines a control system, twisted pair extender, and presentation switcher in a single, affordable package.
Simply place the transmitter in the collaboration space, place the receiver at the display or projector, connect the two with a twisted pair cable, and connect power to the receiver.
No more complexity, lost remote controls or missing presentation adapters—the SMP transmitter and receiver manage the room reliably, affordably, and intuitively.