Bank 5, High Current Outlets - 60 db, 100 KHz - 2 MHz
Voltage and Polarity - 3 - 24V DC, bidirectional
Jacks - 3.5mm (1/8") mono mini-plug
Current Requirement - 4.6 mA @3V, 58 mA @24V
Positive = Tip, Negative = Ring
Pass through no delay
Wires Protected - 8-Wires
Connectors - RJ-45
Clamping Level - 52V
Power Delivery - 500 mA @ 5VDC
Packaging Length - 19.25"
Jacks - USB-A
Wires Protected - 2-Wire, Pins 4 & 5
Suppression Modes - Metallic & Longitudinal
Fuseless/Auto-resetting
Connectors - RJ-11
Clamping Level - 260V
Capacitance - 30pf (approx.)
Shielded
Insertion Loss - < 0.5 dB
HD 1080 i/p Ready
Frequency Range - 0 MHz - 2.2 GHz
Connections Female "F", Gold Plated
Clamping Level - 75V
Bidirectional
Product Dimensions (WxHxD): 24" x 19" x 10"
Shipping Weight: 19.8 pounds
Features:
HD 1080 i/p Ready
Frequency Range - 0 MHz - 2.2 GHz
Total Current Capacity - 15 A
Thermal Fusing
Pass through no delay
Wires Protected - 8-Wires
Connectors - RJ-45
Product Dimensions (WxHxD): 24" x 19" x 10"
Shipping Weight: 19.8 pounds
Overview:
Improves Picture and Sound Quality Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level Panamax?s patent pending AVM? circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Reduces Cross-Contamination Between Components The M5300-PM is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.