RTI RM-433 433MHz RF Receiver Module (for XP & RP Processors)
Reliable RF reception due to matched antenna, connector, and PCB.
Modular design that allows multiple RM-433 units to be wired together. This allows for any desired coverage area.
Output signal is compatible with industry standard infrared repeating systems. This allows multiple IR and/or RF receivers to be wired together into an RTI control system.
No dedicated power supply required. Power is derived directly from the RTI control system.
A feedback LED confirms operation.
Available only to professional system integrators.
RF Carrier Frequency: 433.92 MhZ
Output Drive: 200mA maximum
Module Dimensions 3.5" x 3.4" x 1.0"
Antenna Length 13"
Weight 4.4 oz.
Features:
RF Receiving module for use with the RP-6 Controller.
Modular design allows multiple RM-433 units to be wired together for any desired coverage area.
A feedback LED confirms operation.
Module Dimensions 3.5" x 3.4" x 1.0"
Antenna Length 13"
Shipping Weight: 2Lbs.
Overview:
The RM-433 is a radio frequency receiving device that operates at 433MhZ. It is designed to receive signals that are transmitted by RTI universal system controllers.
The RM-433 contains a microprocessor that monitors all received signals so that RF noise and data from non-RTI transmitters is filtered out. When valid RTI data is detected, the RM-433 passes the signal through its output driver which allows the data to travel long distances over wire. The output driver is compatible with industry standard infrared repeating systems*, and can be wired together with those systems or with additional RM-433 units. This allows RTI control systems to be controlled from almost any location with either IR or RF transmitters.