Lutron RRD-HN6BRL-WH | Hybrid Neutral 6 Button Keypad, White
Power: 120 V~ 50/60 Hz
Typical Power Consumption: 0.75 W (Test conditions: load is off, all backlights on medium intensity, two LEDs on (two presets active), keypad powered at 120 V~)
Environment: Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
Communications: C�L® Hybrid Keypads communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. Remote dimmers are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
ESD Protection: Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection: Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure: Power failure memory: should power be interrupted, the control will return to its previous state when power is restored.
Mounting: Requires a U.S. wallbox. 31/2 in (89 mm) deep recommended, 21/4 in (57 mm) deep minimum. If mounting one control above another, leave at least 41/2 in (114 mm) vertical space between them.
Multiple-Location Wiring: Uses conventional 3-way and 4-way wiring. RD-RD dimmer needs to be installed to control from another location.
Features:
Keypad buttons are programmable to select scene or room preset levels or positions.
At the press of a keypad button, lights fade ON or OFF to desired levels and shades/ draperies open or close to desired positions.
Adjustable backlight intensity.
Prepaid engraving included. Redeemable for one engraved Replacement Button Kit.
Internal dimmer is assigned to top button by default. Tap top button to toggle load ON/OFF.
Internal dimmer can be assigned to any button on the C•L® Hybrid Keypad and can be programmed to be controlled by any keypad.
Can be installed in either single location or multiple-location (with Remote Dimmer) installations.
Overview:
RadioRA® 2 C•L® Hybrid Keypads function as a dimmer and keypad combined into a single device. C•L® Hybrid Keypads are great for retro-fit applications since they eliminate the need to install two separate devices.